Astra VXR "plug & play" standalone ECU Master EMU Black

£1,910.00

A complete Plug and play wiring loom and ECU solution, for the Astra H VXR to be able to use an EMU Black Standalone ECU. This kit plugs into the UEC in the engine bay and utilises a complete new loom meaning you can dispose of your old factory loom.

Running a standalone ECU enables the ability to have more control over tuning than the OEM ECU but also gives you more data inputs to insure your engine is running safely & enables you to setup failsafe’s to protect your engine.

We have found often tuning high power Astra VXR’s there is always a compromise & you start to get into the territory of of trying to trick the factory ECU to achieve a good state of tune. Trying to make an ECU designed to understand demands over double its factory power is a big ask. So we developed this Kit along side MANA Performance to give you a solution.

The use of additional sensors can easily be achieved, The wiring loom has spares built in ready for, Oil Pressure, Fuel Pressure, Oil Temp, EGT, Flex Fuel.

The Onboard MAP sensor in the EMU Black is used for the main Load reference, and A wideband Lambda sensor is used to measure fuelling. Stock IAT, CLT, CAM, Crank and Knock sensors are all used.

The CANBUS Support enables us to be able control the Dashboard of the Astra and even Use some of the switch functionality inside the car, to make changes to the ECU modes, such as High/low boost, Anti-lag, etc. We are also able to offer through factory sensors flat foot shifting & traction control strategies to help you get the power to the ground.

What’s Included:

-EMU Black ECU

-Custom Made High Quality labelled Wiring loom

-Wideband Lambda Sensor

-Base file (tuning will be required)

Please contact us if you have any special requests for inputs or outputs.

A brief video demonstrating the kit can be viewed here.

www.youtube.com/watch?v=BuI7AJOqBAM

Quantity:
Add To Cart

A complete Plug and play wiring loom and ECU solution, for the Astra H VXR to be able to use an EMU Black Standalone ECU. This kit plugs into the UEC in the engine bay and utilises a complete new loom meaning you can dispose of your old factory loom.

Running a standalone ECU enables the ability to have more control over tuning than the OEM ECU but also gives you more data inputs to insure your engine is running safely & enables you to setup failsafe’s to protect your engine.

We have found often tuning high power Astra VXR’s there is always a compromise & you start to get into the territory of of trying to trick the factory ECU to achieve a good state of tune. Trying to make an ECU designed to understand demands over double its factory power is a big ask. So we developed this Kit along side MANA Performance to give you a solution.

The use of additional sensors can easily be achieved, The wiring loom has spares built in ready for, Oil Pressure, Fuel Pressure, Oil Temp, EGT, Flex Fuel.

The Onboard MAP sensor in the EMU Black is used for the main Load reference, and A wideband Lambda sensor is used to measure fuelling. Stock IAT, CLT, CAM, Crank and Knock sensors are all used.

The CANBUS Support enables us to be able control the Dashboard of the Astra and even Use some of the switch functionality inside the car, to make changes to the ECU modes, such as High/low boost, Anti-lag, etc. We are also able to offer through factory sensors flat foot shifting & traction control strategies to help you get the power to the ground.

What’s Included:

-EMU Black ECU

-Custom Made High Quality labelled Wiring loom

-Wideband Lambda Sensor

-Base file (tuning will be required)

Please contact us if you have any special requests for inputs or outputs.

A brief video demonstrating the kit can be viewed here.

www.youtube.com/watch?v=BuI7AJOqBAM

A complete Plug and play wiring loom and ECU solution, for the Astra H VXR to be able to use an EMU Black Standalone ECU. This kit plugs into the UEC in the engine bay and utilises a complete new loom meaning you can dispose of your old factory loom.

Running a standalone ECU enables the ability to have more control over tuning than the OEM ECU but also gives you more data inputs to insure your engine is running safely & enables you to setup failsafe’s to protect your engine.

We have found often tuning high power Astra VXR’s there is always a compromise & you start to get into the territory of of trying to trick the factory ECU to achieve a good state of tune. Trying to make an ECU designed to understand demands over double its factory power is a big ask. So we developed this Kit along side MANA Performance to give you a solution.

The use of additional sensors can easily be achieved, The wiring loom has spares built in ready for, Oil Pressure, Fuel Pressure, Oil Temp, EGT, Flex Fuel.

The Onboard MAP sensor in the EMU Black is used for the main Load reference, and A wideband Lambda sensor is used to measure fuelling. Stock IAT, CLT, CAM, Crank and Knock sensors are all used.

The CANBUS Support enables us to be able control the Dashboard of the Astra and even Use some of the switch functionality inside the car, to make changes to the ECU modes, such as High/low boost, Anti-lag, etc. We are also able to offer through factory sensors flat foot shifting & traction control strategies to help you get the power to the ground.

What’s Included:

-EMU Black ECU

-Custom Made High Quality labelled Wiring loom

-Wideband Lambda Sensor

-Base file (tuning will be required)

Please contact us if you have any special requests for inputs or outputs.

A brief video demonstrating the kit can be viewed here.

www.youtube.com/watch?v=BuI7AJOqBAM